Whirlpool CEDC392JQ0 User Manual

1. Check to be sure all parts are now installed. If there is an 

extra part, go back through the steps to see which step was 
skipped.

2. Check to be sure you have all of your tools.
3. Dispose of all packaging materials. 
4. Check the dryer’s final location. Be sure the vent is not 

crushed or kinked.

5. Check to be sure the dryer is level.
6. Plug into a grounded 3 prong outlet.
7. Remove the blue protective film on the console and any tape 

remaining on the dryer.

8. Read “Dryer Use.”
9. Wipe the dryer drum interior thoroughly with a damp cloth to 

remove any dust.

10. Set the dryer on a full heat cycle (not the Air cycle) for 20 

minutes. Open the dryer door after five minutes and feel for 
heat. If you do not feel heat, turn the dryer off and wait five 
minutes.

■

Controls are set in a running or “On” position.

■

Start button has been pushed firmly.

Repeat 5-minute test as outlined above. If dryer still does not 
operate properly, check the following:

■

Dryer is plugged into a grounded outlet.

■

Electrical supply is connected.

■

House fuse is intact and tight; or circuit breaker has not 
tripped.

■

Dryer door is closed.

■

If dryer makes an unusual noise, check that dryer is level.

NOTE: You may notice a burning odor. This odor is common 
when the heating element is first used. The odor will go away.