Fujifilm FinePix S5 Pro User Manual
162
U SET UP
Z Setting the commander mode
Choose this option to use the built-in flash as a master
flash controlling one or more remote optional Speedlights
in up to two groups (A and B) using Advanced Wireless
Lighting.
Choose this option to use the built-in flash as a master
flash controlling one or more remote optional Speedlights
in up to two groups (A and B) using Advanced Wireless
Lighting.
[BUILT-IN]
Choose flash mode for built-in flash (commander
flash).
flash).
[A GRP.]
Choose flash mode for all flashes in group A.
[B GRP.]
Choose flash mode for all flashes in group B.
[CH]
Choose from channels 1–4. All Speedlights in both
groups must be set to same channel.
groups must be set to same channel.
TTL
i-TTL mode. Menu of flash compensation values
will be displayed; choose value between +3.0 and
–3.0 EV in steps of 1/3 EV. At settings other than
±0,
will be displayed; choose value between +3.0 and
–3.0 EV in steps of 1/3 EV. At settings other than
±0,
will be displayed in control panel and
viewfinder.
M
Choose flash output level for built-in flash from
values between full power and 1/128 power (1/128
of full power).
values between full power and 1/128 power (1/128
of full power).
flashes in control panel and
viewfinder.
—
Built-in flash does not fire, but AF-assist illuminator
lights. Built-in flash must be raised to allow monitor
preflashes to fire. d is not displayed in control
panel flash-sync mode display.
lights. Built-in flash must be raised to allow monitor
preflashes to fire. d is not displayed in control
panel flash-sync mode display.
TTL
i-TTL mode. Menu of flash compensation values
will be displayed; choose value between +3.0 and
–3.0 EV in steps of 1/3 EV.
will be displayed; choose value between +3.0 and
–3.0 EV in steps of 1/3 EV.
AA
Auto aperture (not available with SB-600 and SB-
R200 Speedlights). Menu of flash compensation
values will be displayed; choose value between
+3.0 and –3.0 EV in steps of 1/3 EV.
R200 Speedlights). Menu of flash compensation
values will be displayed; choose value between
+3.0 and –3.0 EV in steps of 1/3 EV.
M
Choose flash output level for flashes in Group A
from values between full power and 1/128 power
(1/128 of full power).
from values between full power and 1/128 power
(1/128 of full power).
—
Flashes in group A do not fire.
TTL
i-TTL mode. Menu of flash compensation values
will be displayed; choose value between +3.0 and
–3.0 EV in steps of 1/3 EV.
will be displayed; choose value between +3.0 and
–3.0 EV in steps of 1/3 EV.
AA
Auto aperture (not available with optional SB-600
and SB-R200 Speedlights). Menu of flash
compensation values will be displayed; choose
value between +3.0 and –3.0 EV in steps of 1/3
EV.
and SB-R200 Speedlights). Menu of flash
compensation values will be displayed; choose
value between +3.0 and –3.0 EV in steps of 1/3
EV.
M
Choose flash output level for flashes in group B
from values between full power and 1/128 power
(1/128 of full power).
from values between full power and 1/128 power
(1/128 of full power).
—
Flashes in group B do not fire.
How to use the SET UP menu (
➝p.138)