Sony DXC-9100P User Manual
44
Connecting to Video Equipment With RGB or S-Video Inputs
Camera cable: CCXC-9DB (D-sub 9-pin)
˜
BNC
connectors), or CCMC-9DS (D-sub 9-pin)
˜
BNC, S-video connectors)
DXC-9100P
RGB/SYNC
or
Camera cable CCXC-9DD (D-sub
9-pin
9-pin
˜
D-sub 9-pin)
RGB monitor, multi-scan
monitor, multi-scan printer
monitor, multi-scan printer
c)
,
image processor, etc.
DC IN/VBS
AC IN
RGB/SYNC
Computer, image
processor, etc.
processor, etc.
R input
G input
B input
Sync input
a)
Composite video (BNC) or
S-video input (4-pin)
S-video input (4-pin)
b)
CCDC-5/10/25/50A/100A cable or
CCMC-12P02/05/20/25 cable
CCMC-12P02/05/20/25 cable
Basic System Connection
VIDEO OUT
EXT CTRL
DC IN/
REMOTE
CCU
LENS
MENU FUNCTION DATA
UP
WHITE
BARS
RGB/SYNC
VBS
SCAN
DOWN
FREEZE
SOURCE
1
2
Set the MODE selector
to the “1” position.
to the “1” position.
Power cord
If a CCMC cable is used, the S-video signal is also output from the
S-video output of the CMA-D2CE/D2MDCE camera adaptor.
S-video output of the CMA-D2CE/D2MDCE camera adaptor.
a) When using a video monitor without a sync signal input connector,
the unit can be set to output a sync signal with the G signal.
For details of how to add the G signal, see “G SYNC” of PAGE
3 menu (on page 22).
3 menu (on page 22).
b) This setup is for connecting a composite video (VBS) connector.
To send separated Y/C signals to the S-video input of video
equipment, use a CCMC-9DS camera cable.
equipment, use a CCMC-9DS camera cable.
For details on switching camera output between VBS (composite
video) and Y/C, see “D-SUB Sync” of PAGE 3 menu (on page
23).
video) and Y/C, see “D-SUB Sync” of PAGE 3 menu (on page
23).
c) When connecting to a multi-scan monitor or multi-scan printer, set
the scan mode to N.I.
For details of how to set the scan mode, see “Setting the Scan
Mode” on page 35.
Mode” on page 35.
CAMERA (4-pin or 12 pin)
CMA-D2CE/D2MDCE
camera adaptor
camera adaptor