Toshiba IK-TF2 User Manual
- 22 -
5 SYNC
When an external sync signal is input, the display changes from INT (internal sync) to EXT (external sync)
automatically.
Sync system display
--
5
SYNC --
H PHASE -100 to 100
MODE
EXT
H PHASE
0
RGB SYNC G, ALL ON, ALL OFF
RGB SYNC
G
Move up and down
By pushing
MENU UP,DOWN
By pushing
MENU UP,DOWN
Set by pushing
DATA UP,DOWN
DATA UP,DOWN
5
1 Adjusting horizontal phase
Set the “” to H PHASE by pushing [MENU UP], [MENU DOWN] buttons.
Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.
Adjust the horizontal phase by pushing [DATA UP], [DATA DOWN] buttons.
5
2Changing RGB SYNC
Set the “” to RGB SYNC by pushing [MENU UP], [MENU DOWN] buttons.
Select G, ALL ON or ALL OFF by pushing [DATA UP], [DATA DOWN] buttons.
Select G, ALL ON or ALL OFF by pushing [DATA UP], [DATA DOWN] buttons.
6 OPTION
RS232C baud rate 9600bps, 19200bps
--
6
OPTION
--
BAUD RATE
9600bps
Move up and down
By pushing
MENU UP,DOWN
By pushing
MENU UP,DOWN
Set by pushing
DATA UP,DOWN
DATA UP,DOWN
6
1 Changing RS232C communication baud rate
Set the “” to BAUD RATE by pushing [MENU UP], [MENU DOWN] buttons.
Select either 9600bps or 19200bps by pushing [DATA UP], [DATA DOWN] buttons.
Select either 9600bps or 19200bps by pushing [DATA UP], [DATA DOWN] buttons.