Toshiba IK-TF2 User Manual

- 23 -

7 Setting to factory setting status

The contents set of each scene file can be returned to the factory default status (preset status).

(1) If characters are displayed on the screen, press the [DISP] button to disable the character display.

(2) Push [MENU DOWN] and [DATA DOWN] buttons simultaneously for approx. 1 second.

(3) The preset operation starts. When the preset operation finishes, the character PRESET OK is displayed

for approx. 1 second.

When using the unit with an external sync signal, input HD and VD to RGB terminal on the rear panel, or

input SYNC to RGB terminal. When the external sync signal is input, the camera automatically switches its

sync from the internal sync to the external sync.

The operation is as shown below, depending on the unit’s status and how external sync signals are input.

Unit’s status

HD / SYNC input

VD input

Operation

Off

Internal sync

External sync with HD

(Only for H sync with HD)

Shutter mode

EXT TRIG

1PULSE SR

or 2PULSE

SYNC

External sync with SYNC

(H sync with HSYNC)

Others Off

Off Internal sync

HD On

External sync with HD, VD

V sync with HD, VD)

SYNC Off

External sync with SYNC

V sync with H SYNC, V SYNC)

Off

External sync with VD

(Only for VD reset)

SYNC

Prohibited

Don't care

1 External sync signal input conditions

2 to 5Vp-p

Negative

2 to 5Vp-p

Negative

2 External sync frequency range

(External sync with HD, VD)

For EIA standard frequency

Within 1% (at horizontal sync frequency)

3 Using the unit with external sync signal

When adjusting H (horizontal) phase refer to the item “7.2 (5)(5.1) Adjusting horizontal phase”.

1 H (horizontal) phase adjustment

Observe the external sync signal and the video signal output

waveform of the unit with a dual trace oscilloscope, and adjust

H phase so that the H phases match.

Match
the phase.

External
Sync. signal

Camera
Video output

3 External Sync