VIVOTEK PZ7122 User Manual

 

 

 

 

This section explains how to configure wired network connection for the Network Camera.

LAN

Select this option when the Network Camera is deployed in a local area network (LAN) and is intended 

to be accessed by local computers� The default setting of Network Type is LAN� Rememer to click 

Save 

when you complete the Network setting�

Get IP address automatically: Select this option to obtain an available dynamic IP address assigned by a 

DHCP server each time the camera is connected to the LAN�

Use fixed IP address: Select this option to manually assign a static IP address to the Network Camera� 

1� You can make use of VIVOTEK installation wizard 2 (IW2) on the software CD to easily set up the 

    Network Camera in LAN� Please refer to Software installation on page 11 for details�

2� Enter the static IP, Subnet mask, Default router, Primary DNS provided by your ISP�

Enable UPnP presentation: Select this option to enable UPnP

TM

 presentation for your Network Camera 

so that whenever a Network Camera is presented to the LAN, shortcuts of connected Network Cameras 

will be listed in My Network Places� You can click the shortcut to link to the web browser� Currently, 

UPnP

TM

 is supported by Windows XP or later. Note that to utilize this feature, please make sure the 

UPnP

TM

 component is installed on your computer�

Enable UPnP port forwarding: To access the Network Camera from the Internet, select this option to 

allow the Network Camera to open ports on the router automatically so that video streams can be sent 

out from a LAN� To utilize of this feature, make sure that your router supports UPnP

TM

 and it is activated�

Network Camera (192.168.5.151)