Profoto D1 1000 Air User Manual
Profoto Air USB – Profoto Studio Air
14
www.profoto.com
Modeling light setting
1. Use the Model Button [10a] to select the modeling light:
a. To select proportional modeling light, press and hold down the Model Button [10a]
until the PROP Indicator [10b] is illuminated.
b. To select free modeling light, press and hold down the Model Button [10a] until
the FREE Indicator [10c] is illuminated. The energy level of the latest selected free
modeling light setting will be activated.
modeling light setting will be activated.
c. To turn off the modeling light, press the Model Button [10a]. Both the PROP
Indicator [10b] and the FREE Indicator [10c] will be turned off. Press the Model
Button [10a] again to turn on the modeling light.
Button [10a] again to turn on the modeling light.
Change the level of the free modeling light:
1. Verify that free modeling light setting is selected (the FREE Indicator [10c] shall be
1. Verify that free modeling light setting is selected (the FREE Indicator [10c] shall be
illuminated when the modeling light is turned on).
2. Press the Model Set Button [
11]. The Display [1] will start flashing, showing the current
energy level of the Free modeling light.
3. While the Display [1] is flashing, use the Setting Knob [7] to change the energ
y level:
a. Turn the Setting Knob [7] clockwise to increase the energy level in 1/10 f-stop
increments and counter-clockwise to decrease.
b. Press and hold down the Setting Knob [7] and turn the knob c
lockwise to increase
the energy in 1 f-stop increments and counter
-clockwise to decrease.
4. Wait until the Display [1] stops flashing.
(The Display [1] will no
w show the energy level
of the flash light.)
Ready signaling setting
1. Use the Ready Button [9a] to select the ready signaling:
a. To select sound signaling, press and hold down the Ready Button [9a] until the
BEEP Indicator [9b] is illuminated.
b. To select light signaling, press and hold down the Ready Button [9a] until the DIM
Indicator [9c] is illuminated.
c. To select both sound and light signaling, press and hold do wn the Read y
Button [9a] until both the BEEP Indica tor [9b] and the DIM Indica tor [9c] are
illuminated.
illuminated.
d. To turn off the read y signaling, press the Read y Button [9a]. Both the BEEP
Indicator [9b] and the DIM Indica
tor [9c] will be turned off.
Press the Ready Button
[9a] again to turn on the ready signaling.