Hitachi DZ-BD70A User Manual

A

dd

itio

na

l In

fo

rm

at

io

n

(1) Disc is not 
formatted. Format 
the disc now?
(2) Disc Format. 
Select record format. 
(Displayed only 
when DVD-RW is 
used.)

These messages appear when a new BD-RE/BD-R/DVD-
RW is inserted.

35

(1) Found partially 
damaged video. 
Recover video data?
(2) Found damaged 
video. Recover video 
data?
(3) Recovering... It 
may take a long 
time. Continue 
recovery?

The system cannot normally complete writing of a file if 
the power is turned off for some reason during recording 
or editing. Selecting “YES” will automatically repair the 
video file. If you quit recovery by pressing 

, the same 

message will appear when the camcorder is turned on 
next time. (Do not remove the disc while the camcorder is 
recognizing it. Removing the disc will deactivate the file 
repair function.)
Follow the instructions on screen, taking note of the 
following cautions:
•

Be sure to use the AC adapter/charger to power the 
camcorder when repairing data. Repair is not possible 
using a battery. If a battery is attached, turn the power 
switch off, connect the AC adapter/charger, and then 
turn the power back on and follow the on-screen 
instructions.

If message (1) appears when using the HDD, a battery 
can be used for repair (if the battery charge indicator 
shows more than half charged).

Repair will normally take several minutes, but it may 
take up to one hour.

Data may not be repaired, depending on the timing 
when power was turned off.

Data may not be repaired normally if data recorded on 
another recorder is mixed in.

The repaired data may differ from the original recorded 
content due to deleted defects.

Since the date/time for repair is added to the repaired 
data (only the corrected portion for partial repair), the 
original date/time information will be lost.

See *1 on p.139

—