Hitachi DZ-BD70A User Manual

A

dd

itio

na

l In

fo

rm

at

io

n

Cannot sleep mode.

The camcorder enters sleep mode when QUICK
START is pressed only while in recording pause mode.

Check the following causes:
-

there is no disc in the camcorder while the power 
switch is set to “BD/DVD”.

there is no SD memory card in the camcorder while 
the power switch is set to “SD CARD”.

the HDD, disc, or card does not have sufficient 
remaining free space.

An usable disc or card is inserted.

the disc navigation screen is appearing.

during playback

40

Cannot take still 
image. Set Movie/
Still switch to 
“Still”.

This message will appear when PHOTO is pressed 
with the movie/stills switch set to “

”.

You cannot record stills on HDD/BD/DVD. Use SD 
card to record stills using this camcorder.

45

Card almost full.

Remaining space is only enough to record less than 10 
stills.
Delete unnecessary stills and try the card, or use another 
card.

99, 170

Card error has 
occurred.

The card terminals may be dirty. Wipe off dirt, and try 
the card again, or use another card.

Data other than still image may be included. Use 
another card.

32

Card error has 
occurred.
Format the card 
now?

The card may have been formatted on a PC, or formatting 
may have been interrupted. Choose “YES” to format the 
card.

104

Card error has 
occurred.
Formatting is not 
complete.

The card may be damaged. Try again or use another card.

32

Card error has 
occurred. Keep card 
inside & restart.

Card error could have occurred during editing of scenes. 
Turn off the camcorder with the card inserted, connect the 
AC adapter/charger, and then turn it on again.

37

Card full.

Delete unnecessary stills, or use another card.

99, 170

Card is not 
formatted.
Format the card 
now?

Was the card formatted on PC? Choose “YES” to format 
the card.

104

Check card.

The inserted card cannot be used in this camcorder. Use 
another card.

32