Lucent Technologies 107970212 User Manual
System Management
Group Call Distribution
Use this procedure to modify the assignment of outside lines for VMS Line
Coverage.
Coverage.
Update Form A, Page 1, Line Coverage of the System Planner for the
communications system to show modifications to VMS-MAIL lines before you
begin.
communications system to show modifications to VMS-MAIL lines before you
begin.
To modify VMS-MAIL lines assignments:
1.
2.
3.
4.
5.
6.
7.
8.
Press [
Feature
] [
0
] [
0
] [
System Program
] [
System Program
].
Enter System Password, if required.
Press [
#
] [
2
] [
0
] [
6
]*.
At the
Group:
prompt, press [
7
].
At the
Line:
prompt, enter the first VMS-MAIL line to be programmed as
Press [
Next Data
] until the display reads
3 VMS Line Cover
or
2 Not
Assigned.
(Be careful not to choose
1 Assigned
because you will
assign Automated Attendant Service coverage rather than ownership to
the line.)
the line.)
To program another line, press [
Next Item
] or [
Prev Item
] until the appropriate
line number displays. Then press [
Next Data
] until
3 VMS Line Cover
or
2
Not Assigned
is displayed.
Press [
Feature
] [
0
] [
0
] to exit programming.
*
In some countries, the procedure code for Group Call Distribution is #205. Check the
Programming and Use guide for the communications system.
5-58