Lucent Technologies 107970212 User Manual

System Management

After assigning Extension Line Coverage, make sure VMS coverage is on for the
extension. See “Automatic VMS Cover” earlier in this chapter or “VMS Cover”
later in this chapter.

Use this procedure to modify the assignment of outside lines for Extension Line
Coverage*.

To assign VMS-MAIL lines specified on Form A, Page 1, Line Coverage, to
specific extensions:

1. Press [ 

 ] [ 

 ] [ 

 ] [ 

 ] [ 

 ].

2 . Enter System Password, if required.

3. Press [ 

 ] [ 

 ] [ 

 ] [ 

 ].

4.

5.

6.

7.

At the 

Line: 

prompt, enter the first VMS-MAIL line to be programmed

as indicated by the extension number in the Line Coverage column of
Form A, Page 1.

At the 

Data: 

prompt, enter the number of the extension in the VMS-MAIL

column.

To program another line, press [ 

 ] or [ 

 ] until the appropriate

line number displays. Then repeat Step 5.

Press [ 

 ] [ 

 ] [ 

 ] to exit programming.

* This feature is not available on all systems. Check the Programming and Use guide for the

communications system.