GE 2-9892 User Manual

4.

To set day.
Advance the day by pressing and holding the 

DAY/TIME

CHECK button until the voice announces each day in
sequence.
Release the button at correct day.

5.

Checking the Time/Day Stamp.
Tap the 

DAY/TIME CHECK button.

The Voice will respond with the current time and day.
Note: A time check can be made at any time the answering
system is not playing.

Important: If the Time/Day Stamp has not been set, the VOICE
system will announce the following during a time check: “12:00
AM Monday”.

Before using your new Answer-Phone

TM

, you should record an

outgoing announcement (OGA). This is the announcement that
callers will hear when the system answers a call.
1.

Prepare your announcement.
Example:  “Hello, I cannot come to the phone right now.
Please leave your name, telephone number, and message
after the tone. I will return your call as soon as possible.
Thank you.”

2.

Hold down ANNOUNCEMENT button.
When tone sounds start recording your message by speaking
into the microphone. Speak clearly and close to the
microphone. Recording will stop when button is released and
another tone will sound.

3.

Answer LED ON/OFF
• Continuously 

ON indicates system is in automatic answer

mode.

• Continuously 

OFF indicates system is off.

Answer LED Flashes
• Quick flashing indicates time lost after power failure and/or no

(OGA) Outgoing Announcement.

Answer LED as a ready indicator
• Continuously 

ON when recording (OGA) or Memo.

Answer LED as an IN-USE INDICATOR
• Blinking ON and OFF during incoming call recording and

during remote functions.

Message LED Flashes
• Number of flashes indicates number of messages recorded.
• Continuously 

OFF indicates no messages.

• Quick flashes indicates tape is full.