GE 2-9892 User Manual

You can use the volume control on the side of the Answer-Phone

TM

to adjust the volume of the system’s speaker. Slide the switch until
you find a comfortable volume level.

To screen calls, set the system to answer calls, and adjust the
VOLUME setting so you can hear the OGA and the caller’s
message on the Answer-Phone

TM

’s built-in speaker.

If you decide to take the call, lift the handset of the Answer-
Phone

TM

or any extension on the line. The system will

automatically stop recording and you may speak to the caller.

If you wish to get rid of your old messages and want to set the
tape to have new messages record over the old messages:
Press the 

MESSAGE RESET button.

•

MESSAGE LED will clear

• New incoming messages will record over old messages on

the tape.

Press and hold down 

MEMO button. Start recording after the

tone. Speak into the microphone and release the 

MEMO button

when finished. The unit will record the time and day stamp and
the 

MESSAGES indicator will be advanced by one count.

When the system’s tape is full, the 

MESSAGES indicator will

flash rapidly. The unit will answer on the tenth ring, and beep
once. If the caller does not enter the unit’s (factory set three digit)
security code within ten seconds, the Answer-Phone

TM

will hang

up. To make room for new messages, press 

PLAY/STOP to listen

to your messages, press

MESSAGE RESET to erase them.