Siemens A31003-S1730-U102-1-7619 User Manual
BHB_DATAIMPORT_01.fm
07/2010
DAKS OScAR-Pro-TT Dataimport-Tool, User Manual
DAKS OScAR-Pro-TT Dataimport-Tool, User Manual
1-3
For internal use only
Conventions and general instructions
Conventions and symbols used in this Manual
1.2
Conventions and symbols used in this Manual
Conventions
The following conventions apply to this User Manual:
Symbols
The following symbols are used in this Manual:
Text
All texts taken from the described files and any text you may enter
into these files will appear in the non-proportional Courier type-
face.
into these files will appear in the non-proportional Courier type-
face.
Password 123456 ...
Details that appear in the continuous text and that are of particu-
lar importance or must be heeded are output in bold print. But-
tons are euqally marked in bold.
lar importance or must be heeded are output in bold print. But-
tons are euqally marked in bold.
global.cfg
file
Files
and directories are indicated by the non-proportional
typeface Courier.
"Name"
Field names, menu names and window descriptions are placed in
quotation marks.
quotation marks.
<Place holder>
Entries or outputs, both of which may vary depending on the indi-
vidual event and settings, are always placed in angle brackets and
written in italics.
vidual event and settings, are always placed in angle brackets and
written in italics.
Table 1-1
Conventions
>
The "i" is used to signal useful additional information.