Monte Carlo Fan Company 5MYR56 User Manual

Install wall control unit to outlet box

using machine screws provided.

Attach front cover to wall control

with screws provided.

Remove cover by snaping off from

top or bottom. Install 12V battery

into wall remote. Duracell MN21 /

Eveready A23 / GP 23A all 12V.

Attach cover of remote by placing

over buttons and snaping into place.

Take switch cap and place over 2

screws and twist  into place. Replace

screw removed and tighten it and the

two other screws securely.

Place medallion on decorative side of blade and

blade bracket to other side of blade and attach

using the blade bracket screws and washers

provided.

Check the motor for plastic shipping stabilizer

tabs, and remove them if they are present. The

screws, washers and motor pads are pre-

installed to the blade holders. Attach blade

assembly to motor and tighten screws securely.

Lift Canopy to ceiling aligning the key hole slots

with the screws on the bottom of the Mounting

bracket.  Rotate the canopy Counter Clockwise

to lock in place.  Tighten the screws to secure

the Canopy.  See inset for Keyhole shape

To control fan speed select from High, Medium

or low speed buttons.  To turn the fan off press

the Fan on / off button.  To dim upper lights

press and hold U/L botton.  To dim Lower lights

press and hold D/L button.  To turn off either

up or down light press and quickly release

either U/L or D/L button.  Press button marked

REV to reverse the rotation direction of the fan

blades

Fan speed

control but-

tons

Fan on / off

Light dim-

mer for up

and down

lights

Fan

reverse

button