FIELD CONTROLS 46511500 User Manual

page 3

 Never expose eyes or skin to UVC light from any source. Looking directly at the UVC light may cause permanent eye damage or blindness.

Never operate the UV-Aire Air Purifying System out of the plenum. Avoid touching the glass portion of the lamp with your hands.

GENERAL INFORMATION
The UV-Aire unit uses technology that is recommended by doctors who state that “ultraviolet radiation, 

properly integrated with heating, ventilating, and air conditioning systems, shows the most promise as a 

widely applicable means of air disinfection”.

1

Optional UVC-Light Shield:
Designed to mount at virtually any angle to guard or shield certain plastics, 

wiring or air filters that may be affected by UVC light.

Optional UVC-Light Shield

Square Footage

UV-Aire

(For ducts at least 16" wide)

Volts Watts Amps

Hz

Up to 2000

1

120

30

.5

60

4000

2

120

30

.5

60

Figure 1

 

Figure 2

Locate a suitable location for the unit 

1. 

downstream from the 'A' coil in the supply 

plenum or in the return plenum; preferably 

downstream from the air filter. For optimum 

"cleaning" effect on the 'A' coil, mount the 

unit in the supply plenum as close as possible 

to the 'A' coil. (See Figure 1) 

 

 Investigate and determine the 

location of the A coil prior to drilling holes in duct for mounting 

unit. 

 

 For duct board installation, refer to enclosed bagged 

assembly containing mounting plate and instructions.
Apply supplied mounting template to air duct in either a vertical 

2. 

or horizontal position as shown in Figure 2. (Leave template 

mounted to duct for future reference.)
Drill 

3. 

1

⁄

8

" diameter mounting holes at positions indicated on 

template. (See Figure 3)

Notes:

For applications with multiple systems, we 

•

recommend one unit per system.
For larger applications, multiple units are  

•

recommended. Contact technical support at 
1-252-522-3031 for sizing.