Monessen Hearth IDV490NVC User Manual

57D0016

OFF

PILOT

OFF

TH
TP

TH/TP

OFF

Optional

15’ Wall Switch

OFF

Optional

Remote Control

��

REMOTE WALL MOUNTED SWITCH

A remote wall switch and up to ﬁfteen (15) feet of 18 Ga. wire may be used with this appliance. Attach the wall switch in a

junction box at the desired location on the wall. See Figure 17.
NOTE: Extended lengths of wire may cause the ﬁreplace not to function properly. Longer length of wire

is permitted if the wire is made out of larger gauge (diameter) wire. Always check with local
code.

Figure 17 - Wiring Diagram for Wall Switch

ELECTRICAL INSTALLATION

ELECTRICAL WIRING

Electrical connections should only be performed by a qualiﬁed, licensed electrician.
Main power must be off when connecting to main electrical power supply or performing
service. All wiring shall be in compliance with all local, city, and state codes. The
appliance, when installed, must be electrically grounded in accordance with local
codes, or in the absence of local codes, with the National Electrical Code ANSI/ NFPA
70 (latest edition) and Canadian Electrical Code, CSA C22.1.

ARNING

Label all wires before disconnecting when servicing controls. Wiring errors can cause
improper and dangerous operation.

CAUTION

Verify proper operation after servicing.

This insert will work without any electrical supply. Electricity is only needed to operate blower.