Monessen Hearth DFS32PVC User Manual

38 

1. Remove top and bottom louver assemblies by disengaging hooks.  Pull assemblies up and away from unit. 
  See Figure 33.
2. Remove canopy by removing screws and pulling canopy away from unit.  See Figure 34. 
3. Set bottom trim kit piece in place on bottom of face. Bottom piece will be held in place by the side pieces. 
  See Figure 34.

4.  Loosely install four supplied screws 

into left and right sides of unit face.  

Leave approximately 1/8th in. of 

screw shaft protruding from unit

in each location. See Figure 35.

5. 

Set left and right side piece of trim 

kit in place on unit. Lean the top of

each piece away from the unit and 

towards you in order to install top 

trim kit piece. Top piece should

fi t with sides as shown.