Monessen Hearth BBV400 User Manual

Page of 40
62D4036
5
BBV, SBV Series Natural Vent Gas Fireplaces
PRODUCT FEATURES
PRODUCT SPECIFICATIONS
• 
This appliance has been certified for use with either 
natural or propane gas. See appropriate data plates.
• 
This appliance is not for use with solid fuels.
• 
The appliance must be installed in accordance with 
local codes if any. If none exist use the current instal-
lation code, ANSI Z223.1/NFPA 54 in the US and 
CSA B149 in Canada.
• 
The appliance must be properly connected to a vent-
ing system.
• 
The appliance is not approved for closet or recessed 
installations.
FP1920
BBV SBV parts 
9/08
Gas Control
(not shown)
1/2” 
Nailing 
Flange
5/8” 
Nailing 
Flanges
1/2” 
Nailing 
Flange
Figure 1 -
BBV/SBV Fireplace
FP1920
HIGH ELEVATIONS
Input ratings are shown in BTU per hour and are cer-
tified  without  deration  for  elevations  up  to  4,500  feet 
(1,370 m) above sea level.
For elevations above 4,500 feet (1,370 m) in USA, in-
stallation must be in accordance with the current ANSI 
Z223.1/NFPA  54  and/or  local  codes  having  jurisdic-
tion.
In Canada, please consult provincial and/or local au-
thorities having jurisdiciton for installation at elevations 
above 4,500 feet (1,370 m).
GAS PRESSURES
   
Natural 
Propane (LP)
  Inlet Minimum 
4.5” w.c. 
11.0” w.c.
  Inlet Maximum 
10.5” w.c. 
13.0” w.c.
  Manifold Pressure 
3.5” w.c. 
10.0” w.c.
GAS SPECIFICATIONS & ORIFICE SIZE
 
  
 
Max.Input  Min. Input 
Orifice 
  Model 
Fuel 
BTU/h 
BTU/h 
Size
  BBV400NV 
Nat. 
22,000 
16,000 
#43
  BBV400PV 
LP 
22,000 
14,500 
#55
  SBV400NV 
Nat. 
29,000 
16,500 
#41
  SBV400PV 
LP 
29,000 
16,300 
#53
  SBV500NV 
Nat. 
31,500 
19,000 
#37
  SBV500PV 
LP 
31,500 
20,000 
#52
BEFORE YOU START
Read  this  homeowner  manual  thoroughly  and  follow  all 
instructions  carefully.  Inspect  all  contents  for  shipping 
damage and immediately inform your dealer if any dam-
age is found. Do not install any unit with damaged, incom-
plete, or substitute parts. Check your packing list to verify 
that all listed parts have been received. You should have 
the following:
   Fireplace (Firebox and Burner System)
   Log Set 
  Volcanic Rock
   Rock Wool 
  White Toggle Switch
  Switch Cover Plate 
  Plastic Bag (1)
  Ziplock Bag 2” x 3” x 3”
ITEMS REQUIRED FOR INSTALLATION
  Phillips Screwdriver 
  Framing Materials
  Hammer 
  Wall Finishing Materials
  Saw and/or saber saw 
  Level
  Electric Drill and Bits 
  Tee Joint
  Pliers 
  Measuring Tape
  Square 
  Pipe Wrench
  Caulking Material (Noncombustible)
  Fireplace Surround Material (Noncombustible)
  Piping Complying with Local Codes
  Pipe Sealant Approved for use with Propane/LPG
  (Resistant to Sulfur Compounds)