Hearth & Home Technologies Tucson (8700) User Manual
HearthStone Quality Home Heating Products Inc
Tucson
Model #8700
4
I
NTRODUCTION
Congratulations on your purchase of a
Tucson Gas-Fired Direct-Vent heater. The
Tucson, by HearthStone, incorporates the
latest in balanced vent gas technology,
which will provide you with clean, efficient
heat for years to come. The combination of
natural stones and cast iron gives the Tucson
a pleasing look that can be maintained with
minimum care.
The Tucson will provide you with years of
practical and convenient service. However,
as with any gas appliance, the unit must be
properly and safely installed and maintained
by qualified service personnel to ensure safe
and trouble-free operation.
Your Tucson is equipped with a standard
pilot which:
Tucson Gas-Fired Direct-Vent heater. The
Tucson, by HearthStone, incorporates the
latest in balanced vent gas technology,
which will provide you with clean, efficient
heat for years to come. The combination of
natural stones and cast iron gives the Tucson
a pleasing look that can be maintained with
minimum care.
The Tucson will provide you with years of
practical and convenient service. However,
as with any gas appliance, the unit must be
properly and safely installed and maintained
by qualified service personnel to ensure safe
and trouble-free operation.
Your Tucson is equipped with a standard
pilot which:
1. generates a milli-volt signal that
powers the wall-mounted thermostat
and;
and;
2. lights the main burner when the
thermostat calls for heat.
This unit is equipped with an On/Off/T’stat
switch and a variable output control. The
variable output control is located on the gas
control valve. It allows you to vary the heat
output, along with the flame height to suit
personal taste. Heat output can be reduced
{set to “LOW”} during the Fall and Spring,
when the need for heat is reduced and
increased {set to “HIGH” during Winter
months, when the need for heat is the
greatest.
A wall-mounted thermostat is provided by
HearthStone. Regardless of how you set the
variable output control, when the optional
thermostat has been installed and the
On/Off/T’stat switch is set to “T’stat”, the
wall-mounted thermostat will control the
on/off cycling of the unit. At any time, you
can override the thermostat with the
On/Off/T’stat switch by setting it to “ON”
or “OFF”.
The Unit can also be equipped with an
optional blower fan, Kit which turns on and
off independently of the burner flames.
When the switch, which allows you to turn
the fan on or off and control the speed of the
fan to suit your needs, is set to “High” or
“Lo”, the fan will automatically turn on
when the stove is hot and cycle off when the
unit is no longer hot.
Also available are two different optional
remote controls. Both of the remote controls
are capable of turning the unit on and off.
One of the optional remotes also allows you
to control the temperature of the stove from
anywhere in the vicinity of the unit. If “ON”
& “OFF” are the only controls required, Kit
# 90-56912 can be used. If you would like to
control the temperature via the remote
control, use Kit # 90-56914.
can override the thermostat with the
On/Off/T’stat switch by setting it to “ON”
or “OFF”.
The Unit can also be equipped with an
optional blower fan, Kit which turns on and
off independently of the burner flames.
When the switch, which allows you to turn
the fan on or off and control the speed of the
fan to suit your needs, is set to “High” or
“Lo”, the fan will automatically turn on
when the stove is hot and cycle off when the
unit is no longer hot.
Also available are two different optional
remote controls. Both of the remote controls
are capable of turning the unit on and off.
One of the optional remotes also allows you
to control the temperature of the stove from
anywhere in the vicinity of the unit. If “ON”
& “OFF” are the only controls required, Kit
# 90-56912 can be used. If you would like to
control the temperature via the remote
control, use Kit # 90-56914.
R
EAD THIS
O
WNER
’
S
M
ANUAL
Operate and maintain this gas heater
according to the instructions in this manual.
Read this manual in its entirety. This
manual has two sections, the first section is
for the O
according to the instructions in this manual.
Read this manual in its entirety. This
manual has two sections, the first section is
for the O
PERATOR
, and the second section is
for the
Q
UALIFIED
S
ERVICE
P
ERSONNEL
only.
H
EATER
M
UST
B
E
I
NSTALLED
AND
M
AINTAINED
B
Y
Q
UALIFIED
S
ERVICE
P
ERSONNEL
Verify the gas connections and venting
systems with requirements of local, regional
or national installation codes. Qualified
service personnel must inspect the gas heater
before use and at least annually.
systems with requirements of local, regional
or national installation codes. Qualified
service personnel must inspect the gas heater
before use and at least annually.