Hearth & Home Technologies SL-750TV-D User Manual

Heat & Glo  •  SL-550 / 750 / 950TV-D  •  2053-985 Rev. H  •  9/06

8

Before beginning the installation be sure that the following 
tools and building supplies are available.

Reciprocating saw 

 Framing material

Pliers 

 Hi temp caulking material

Hammer  

Gloves

Phillips screwdriver 

 Framing square

Flat blade screwdriver   Electric drill and bits (1/4 in.)

Plumb line 

 Safety glasses

Level Tape 

measure 

Manometer Voltmeter

Non-corrosive leak check solution

1/2 - 3/4 inch length, #6 or #8 Self-drilling screws

One 1/4 inch female connection (for optional fan).

Inspect appliance and components for 
damage. Damaged parts may impair safe 
operation.

•  Do NOT install damaged components.
•  Do NOT install incomplete components.
•  Do NOT install substitute components.

Report suspected damaged parts to dealer.

•  Carefully remove the appliance and components from 

the packaging. 

•  The vent system components and trim doors are shipped 

in separate packages. 

•  The gas logs may be  packaged separately and must be 

fi eld installed. 

•  Report to your dealer any parts damaged in shipment, 

particularly the condition of the glass. 

Hearth & Home Technologies disclaims any 
responsibility for, and the warranty will be voided 
by, the following actions:

•  Installation and use of any damaged appliance or vent 

system component.

• Modifi cation of the appliance or vent system.

•  Installation other than as instructed by Hearth & Home 

Technologies.

•  Improper positioning of the gas logs or the glass door.

•  Installation and/or use of any component part not 

approved by Hearth & Home Technologies.

The following B-vent components are needed for installa-
tion (see Figure 2.2).

• Fireplace Box

• Pipe Components

• Firestops

•  Attic Insulation Shield

• Elbows

• Strapping

•  Roof Flashing or Chase Top

• Termination Cap

• Storm Collar

•  Read all of the instructions before starting the instal-