Hearth & Home Technologies HUDBAY-FS User Manual

Page  28

10/08

Quadra-Fire  •  Hudson Bay  •  7003-121 Rev. i

Remove shipping materials from inside or underneath the 
fi rebox.

Install approved accessories per instructions included with 
accessories.  Refer to Section 12 for appropriate accesso-
ries.

Shock or fi re risk.
Use ONLY optional accessories approved for 
this appliance.
•  U s i n g   n o n - l i s t e d   a c c e s s o r i e s   v o i d s 

warranty.

•  Using non-listed accessories may result in a 

safety hazard.

•  Only Hearth & Home Technologies approved 

accessories may be used safely.

Use a soft cloth and a window cleaning solution to clean 
all fingerprint oils from the gold or nickel surface of crown 
PRIOR to lighting the appliance.

Open lower access panel.  Pull out and unhook 

the two spring latches on the bottom of the appliance that 
secure the door.  

Rotate the door forward approximately 1-1/2 in. (38mm). 
Holding the ashlip, lift the door up off of the stationary latches 
and away from the appliance. 

Stationary latches

Spring latches

Uninstall the existing crown by removing the four  

screws on the back side of the door.  Retain the screws.

Use a fl at-head screwdriver to pry the black crown 

free on the right side. Remove the crown and discard. 

Carefully align the left side of the crown into place, 

and wrap it across the face of door, fi nally

 

snapping it into 

place on the right hand side. Reinsert and tighten the screws 
previously removed.