Hearth & Home Technologies HUDBAY-FS User Manual

10/08

Page  29

Quadra-Fire  •  Hudson Bay  •  7003-121 Rev. i

   

Keeping the baffl e elevated with your free hand, 

put the right side brick into position.  Rest the baffl e on the 
right side brick.

   

Still holding the baffl e in place, install the left brick 

into position. 

   

To install the baffl e, slide it in at an angle and rotate 

upward parallel with the fi rebox.  Place baffl e up against 
the heat exchangers in top of fi rebox. 

 Holding against heat 

exchangers, slide baffl e towards front of appliance.

Following instructions stated above, remove the 

door of  appliance.

Remove the four screws (two at each end) holding the grille 
in place. Lift up to remove. 

Install the new grille by reversing the removal instructions.

NOTE:  Clean glass and gold or nickel plating with glass 
cleaner and a soft cloth, wiping off all fi ngerprints prior to fi rst 
fi re to prevent permanent staining.

The pilot shield has to be removed to install or 

remove the brick refractory.  Removal of the bracket requires 
removing two screws.