Hearth & Home Technologies 36EBU User Manual

 
 

 

NOTE: Wiring of the thermostat must be completed prior to installing the unit. 

 

NOTE: The following installation instructions are for a single pole thermostat included with the unit. 

 

 

The wall mounted thermostat is connected to the fireplace by running a 2 conductor wire with a ground from the junction 
box on the back of the unit to the thermostat.   

1.  Locate the switch on the top corner of the unit and ensure that the power conversion switch is in the proper 

position for the required supply voltage. 

2.  Loosen the screw securing the junction box and remove the cover. Pull out the wire nut that contains wires 

marked 1 & 2. 

3.  Remove the wire nut and separate the wires marked 1 & 2. 
4.  Connect one of the wires from the thermostat to the wire marked 1 and the other wire to the wire marked 2.   
5.  Connect the ground wire from the thermostat to the ground wire grouping from the power supply. 
6.  Ensure that all connections are tight. Insert all the wiring into the unit and secure with a cable clamp.