Sanyo CH0951 User Manual

Basically, these models can be installed and wired with-

out removing the grille. If access to any internal part is

needed, follow the steps as given below:

(1) Set the flap in the horizontal position.

(2) Unscrew the screws. (Fig. 16a or 16b)

(3) Remove the grille. (Fig. 17)

(a) Hold both corners of the air intake grille, then

pull out and up to open.

(b) Pull the lower part of the grille toward you to

remove.

(c) Use a standard screwdriver to push up the 3

tabs to remove the grille.

(1) Close the flaps.

(2) Reinstall the grille into the lower part while aligning

its tabs on the upper part. (Fig. 18) Insert the tabs in

the slots and push the lower part of the grille back

into position.

(3) Press at each of the 4 tabs to completely close the

grille. Make sure that the grille and frame are firmly

fitted together. (Fig. 19)

Flap
 (Up and down air direction louvre)

Screw cover

Air intake grille

01-385 AirCon  12/11/01 4:41 PM  Page 8