APC ACPA4000 User Manual
NetworkAIR ACPA4000
10
Assemble the ducts
1. Thread the duct collars counterclockwise onto each of
the ducts until they bottom out.
2. Install each hose so that the leading edge of the
compressed section of the hose matches air direction
flow.
flow.
3. Slide the duct collar of each hose
over the ceiling adapter sleeves and
turn the duct collar to lock in place.
turn the duct collar to lock in place.
4. Slide the duct collars on the other
end of the ducts over the condenser flanges
and turn to lock in place.
and turn to lock in place.
na
03
1
2a
Note: The hoses used are directional and
reduce airflow if not properly installed.
Expand the length of hose to fit the required
space.
reduce airflow if not properly installed.
Expand the length of hose to fit the required
space.
na
12
35a
Air Flow
na
03
1
7a
Note: Connect the air
diverter side of the ceiling
adapter to the exhaust
hose.
diverter side of the ceiling
adapter to the exhaust
hose.
na01
50
b
na01
50
b
na01
50
b
na01
50
b