Dakota Digital LAT-NR101 User Manual

9.  Screw the mounting plate into the mount using the two previously removed 3/8” #6 screws.  

This will secure the LED assembly into the housing.  You are now ready for re-assembly.  

 

   

 

 
10. Repeat the steps above for the second light.   

 

 
11. Install the lens and reassemble the housing, insuring all gaskets are intact and in place.  Install 

the housing back into the vehicle.  You are now ready to wire the LED assembly into the 
vehicle harness.   

 

 

MAN# 650195