Runco LS-10D User Manual
Runco LS-10d Installation/Operation Manual
27
PRE
L
IMINAR
Y
Attaching the Security Hooks: To help stabilize and support the added weight of the
Anamorphic Lens and Lens Transport Assembly, the attachment plate includes two
security hooks and related hardware for attaching the front part of the plate to the ceiling
above.
Anamorphic Lens and Lens Transport Assembly, the attachment plate includes two
security hooks and related hardware for attaching the front part of the plate to the ceiling
above.
Proceed as follows to attach the security hooks. This requires the following tools and
materials:
materials:
• Pliers
• Scissors
• Ceiling Hooks (not supplied)
1.
Install the Plate Hook Assemblies in the
two “H” holes of the Attachment Plate
(see diagram on page 25) with the hook
ends on the ceiling side as shown above.
two “H” holes of the Attachment Plate
(see diagram on page 25) with the hook
ends on the ceiling side as shown above.
2.
Use pliers to bend the closed hooks apart
just enough to install a Chain End at a
later time.
just enough to install a Chain End at a
later time.
3.
Attach the plate hooks to the ceiling as
described in the section entitled Ceiling
Mounting (Inverted), on the next page.
described in the section entitled Ceiling
Mounting (Inverted), on the next page.