Runco LS-10D User Manual

Front Panel Brightness: Select Front Panel Brightness from the Service menu to adjust 
the brightness of the front-panel LED and LCD status indicators.

• Logo LED: Select Logo LED from the Front Panel Brightness menu to adjust the 

brightness of the large, illuminated logo on the left side of the display. The range is from 
0 (off) to 31. 

• Standby LED: Select Standby LED from the Front Panel Brightness menu to change 

the behavior of the front-panel STANDBY indicator LED. When set to ON, the LED 
lights amber when the system is in standby mode; otherwise, it is off. When set to OFF, 
the LED is always off. 

• LCD: Select LCD from the Front Panel Brightness menu to adjust the brightness of the 

front-panel LCD. The range is from 0 (off) to 4. 

Auto Power Off: Select Auto Power Off from the Service menu to have the LS-10d turn 
itself off after a period of inactivity (no source signal present). 

• Enable: By default, Auto Power Off is disabled. To enable it, select Enable from the 

Auto Power Off sub-menu and set it to On.

• Hours: The default time-out period is eight (8) hours; the range is from 1 to 24 hours. 

System Reset: To reset ALL controller settings (including image settings) back to their 
factory defaults, choose System Reset from the Service menu. 

A confirmation message appears. Select Yes to continue with the reset or select No to 
cancel. 
 

This action is not undoable. Proceed with caution! Before you 
perform a System Reset, save your “Custom” Memory Presets 
(page 56) and ISF Day/Night Memory Presets (page 63).

Logo LED

LCD

Standby LED