Runco X-200i User Manual
82
Runco X-200i Series Installation/Operation Manual
PRE
L
IMINAR
Y
Key Commands: The syntax for key commands is simple:
ky <keyname>[CR]
Some key command examples:
ky menu[CR]
Bring up or cancel menu display.
ky cur.up[CR]
Up arrow.
The response from the projector for key commands is
ACK: followed by the same
command in
UPPERCASE.
Input:
ky menu[CR]
Response:
ACK:MENU [CR]
Table 6-1 lists the serial command key names and IR codes.
Table 6-1. Serial Command Key Names and IR Codes
RS232
Keyname
Remote
Button
IR Code
Description
Set 1
Set 2
0x01
0xB7
Turn power on.
(none)
0x02
0xB8
Switch to the next source.
0x09
0xB9
Turn power off.
menu
0x15
0xBA
Bring up or cancel menu display.
enter
0x17
0xBB
Keypad enter.
cur.down
0x18
0xBC
Keypad down arrow.
cur.up
0x1A
0xBD
Keypad up arrow.
cur.left
0x1D
0xBE
Keypad left arrow.
cur.righ
0x1F
0xBF
Keypad right arrow.
0x80
0xC0
Bring up or cancel brightness slider.
0x81
0xC1
Bring up or cancel contrast slider.
(none)
0x84
0xC4
Force reacquisition of active source.
(none)
0x85
0xC5
Switch to the next gamma.
(none)
0x86
0xC6
Switch to 2.5 gamma.