Runco X-200i User Manual

Operations Commands: Operations commands allow more flexible and direct control of 
the projector. The syntax for operations commands is as follows:

(Precede 

<operation> and <command> with a space.)

The command type can be one of three functions:  

Table 6-2 lists the valid operations commands. For Set and Get functions, the response 
from the projector is 

ACK: followed by the command and = <value> where <value> is 

the current value or 

ERR:NA if the value is not available. For Execute functions the 

response is 

ACK: followed by the command.  All responses are in UPPERCASE.

Some operations command examples:

Input: 

Response: 

Input: 

Response: 

Input: 

Response: 

Input: 

0xB0

0xF0

Apply VIrtual Cinema aspect ratio to the 
active source.

(none)

0xAC

0xEC

Toggles between power on and power off.

0xAD

0xED

Activates remote backlighting only when 
pressed momentarily. 

0xB1

0xF1

Switch to 3D Auto mode. 

0xB2

0xF2

Switch to 3D Side-by-side mode. 

0xB3

0xF3

Switch to 3D Top-and-bottom mode. 

Set

= <value>

Makes the unit take that value.

Get

?

Asks what the current value is.

Execute

(none)

Performs an action such as a reset.