Sony HM-982RW User Manual
Recording on CD-R/RW
36
Preparation section
Basic section
Apprication section
Knowledge section
Recording on CD-R/RW
1.
Load a disc.
When a non-used disc or a disc which has not been unfinalized is loaded
in the CD recorder, the CD-R IN indicator may sometimes blink for a while.
"OPC (Optimum Power Control)"
in the CD recorder, the CD-R IN indicator may sometimes blink for a while.
"OPC (Optimum Power Control)"
‡
(Loading a CD-R/RW in the CD recorder)
÷ To record audio from a CD, load the source music CD in the CD player and load the
CD-R/RW in the CD recorder.
÷ If the CD-R IN indicator blinks after the tray has been closed, the disc cannot be
ejected.
÷ When "FINALIZED CD-RW" is displayed, additional recording to the disc is
possible after unfinalizing it.
a
Even when the CD contains the recording of text
data, it is not copied onto the CD-R/RW.
data, it is not copied onto the CD-R/RW.
1 Press CD recorder tray open/close (0) key.
2 Place a recordable CD-R or CD-RW disc.
78
3 Press CD recorder tray open/close (0) key.
tape loading mechnism
2
2
4
4
1
1
0
CD-R IN
0
CD-R IN
\
Blinks
Lights
÷ Ensure that the CD-R/RW has no scratch or dirt on the recording surface.
÷ If the CD-R/RW has previously been recorded, the end of the last track is searched
automatically to start recording from there.
The CD-R IN indicator blinks first, then it lights steadily when the disc has
been identified (now the disc is ready for recording).
been identified (now the disc is ready for recording).
Pause the
recording
recording
Stop the re-
cording
cording
Stop the recording
Pause the recording
The label must be on top.
Do not touch the played surface