Axor 39136XX1 User Manual

4

•

  Place a compression nut and ferrule over 

the spout tube.  

•

  Install the mounting angle.  Tighten the 

compression nut by hand, then finish 

tightening with a wrench.

•

  Screw the hot and cold connection hoses 

to the mounting angle.  

•

  Place a compression nut and washer over 

the shank end of  one of the connection 

hoses.  

•

  Attach the hose to the outlet port on the 

valve with the compression fitting.  Tighten 

with a wrench.  Repeat with the other 

connection hose.

•

  Install the supply hoses (not included) and 

connect them to the stops.

•

  After the drain is installed, turn on the 

water and check all connections for leaks.