Axor 39136XX1 User Manual

5

Remove the plunger assembly.

Unscrew the drain outlet flange from the tee.

Unscrew the tailpiece from the tee.  Wrap the 

threads with plumbers’ thread tape and replace. 

Install the white, flexible sealing gasket to the 

flange.  Place it in the sink outlet. 

From under the sink, install the black mack gas-

ket, white friction ring  and retainer nut  to the 

flange. Do not tighten the nut against the bottom 

of the sink at this time.

Thread the tee and tailpiece to the flange.  The 

pivot must face the faucet.  If necessary, turn the 

drain assembly.

Tighten the retainer nut.  

Place the plunger assembly in the drain. 

Install the horizontal rod so that the end goes 

through the loop in the bottom of the height 

adjuster.

Install and hand tighten the pivot ball nut.

Attach the swivel connector to the end of the 

horizontal rod.  

Attach the swivel connector to the end of the 

pull rod.   Position as desired and tighten with a 

small, flathead screwdriver.

plunger

flange

sealing gasket

mack gasket

friction ring

retainer nut

horizontal rod

height adjuster

pivot ball nut

swivel connector

pull rod

tee