Axor 39144XX1 User Manual

·     Install the outer sleeves to the hot 

and cold valves.  Measure each 

outer sleeve to a point 3/8” from 

the surface of the finished wall.  

Mark the sleeve at this point.  Cut 

the sleeves.   Install the inner 

sleeve.

·     The handle should be parallel 

to the floor.  If it is not, remove 

the handle.  Remove the handle 

insert, turn it slightly and replace.  

The handle should now be 

parallel to the floor.  

·     Measure the inner sleeve to a 

point 1⁄2” from the surface of the 

finished wall.  Mark and cut the 

inner sleeve at this point.  Place 

the handle over the inner sleeve.

·     Remove the handles.