Emerson Series 3000 MVD User Manual

123

If the print request occurs:

•

When flow is not present (the batch is stopped or ended), the batch ticket is printed.

•

When flow is present, the request is queued until flow stops, and the batch ticket is printed at 
that time.

Note: You can assign one or more actions to a single discrete input or discrete event. Other discrete 
input and discrete event actions and assignments are listed and defined in Table 7-14. Note that if you 
assign ticket printing to a discrete input or a discrete event, all standard, batch, batch (NTEP), and 
batch (OIML) tickets will be printed, but if a transfer (OIML) ticket is assigned with other ticket 
types, only the transfer (OIML) ticket will be printed. If required, assign the transfer (OIML) ticket to 
one discrete input and assign all other tickets to the second discrete input.

If multiple tickets are printed:

•

With one print request, all tickets are identical.

•

With multiple print requests, each ticket contains the timestamp and batch data that was 
current when the ticket was printed. 

This section describes the formatting and printing of transfer tickets when the custody transfer 
application is configured for World Area = NTEP.

The batch (NTEP) ticket is basically a batch ticket, with a few additional options. To format batch 
(NTEP) tickets:

1. Format a batch ticket as described in Section 15.4.1. 

2. In the Digital Communication menu, select 

, then select 

. The menu shown in Figure 15-3 is displayed.

3. Set parameters as desired. See Table 15-5.