Emerson Series 3000 MVD User Manual

125

To print a batch (NTEP) ticket automatically when the batch target is reached, set the Auto Print 
parameter for batch tickets to Yes (see Table 15-4).

To print a batch (NTEP) ticket from the display, use the 

 button on the batch process screen. 

The 

button appears only when the batch is ended; it does not appear when the batch is stopped.

You can configure the Series 3000 device to print a batch (NTEP) ticket when a discrete input is 
activated or a discrete event occurs. This ticket can include one or several screens in addition to the 
batch (NTEP) ticket; all assigned screens will be printed. To do this:

1. From the Digital Communication menu (see Figure 15-1), select 

, then 

select 

.

2. Using the 

 option, select the discrete input or discrete event to which you will 

assign screens.

3. Using the 

 option, specify the screens that will be printed when the specified 

discrete input is activated or the discrete event occurs. You may specify as many screens as 
desired.

If the print request occurs:

•

When flow is not present (the batch is stopped or ended), the batch (NTEP) ticket is printed.

•

When flow is present, the request is queued until flow stops, and the batch (NTEP) ticket is 
printed at that time.

Note: You can assign one or more actions to a single discrete input or discrete event. Other discrete 
input and discrete event actions and assignments are listed and defined in Table 7-14. 

Before the batch reset is performed, additional batch (NTEP) tickets for the current transaction can be 
printed manually, by using the 

 button or by activating a discrete input that has been configured 

to print a batch (NTEP) ticket. The batch (NTEP) tickets will contain identical custody transfer data, 
and all tickets except the first, will include the “Duplicate receipt” banner. 

This section describes the formatting and printing of transfer tickets when the custody transfer 
application is configured for World Area = OIML and the discrete batch application is not used to 
manage the custody transfer transaction.

To format transfer (OIML) tickets:

1. In the Digital Communication menu, select 

 and set 

 to 

. 

The menu shown in Figure 15-4 is displayed.

2. Select 

.

3. Set parameters as desired. See Table 15-6.