Emerson Series 3000 MVD User Manual

27

To enter the menus:

•

To enter the Management menu system, press the 

 button. The 

button is in 

the lower right corner of the display, marked with a padlock icon (see Figure 4-1). You may or 
may not be required to enter a password (see the following section).

•

To enter the View menu system, press the 

or 

button (see Figure 4-1).

You can use the 

 button to access management functions from any point in the Series 3000 

menus. When the 

 button is pressed:

•

If security is disabled, the Management menu will be displayed immediately. See Figure 4-4. 
By default, security is disabled.

•

If security has been enabled, you will be prompted to enter a password. See Figure 4-5. There 
are two passwords: 

-

The configuration password enables access to all functions. When it is entered, the 
Management menu is displayed.

-

The maintenance password enables access to the maintenance functions. When it is 
entered, the Maintenance menu is displayed.

Both passwords consist of a sequence of four cursor control button presses. To enter a password:

1. Press the four cursor control buttons in the correct sequence.

2. Press 

.

To configure and enable security, see Chapter 5. 

5

←

DEVICE 1

→2

Mass Flow Rate

2.33

g/s

Mass Total

485.88

g

PRINT

RESET

EXIT

DEVICE 1

Configuration

Maintenance
Security
Language

SEL

EXIT