Honeywell TB7100A1000 User Manual

62-0273-05

The TB7100A1000 MultiPRO™ Multispeed and Multipurpose Thermostat provides electronic control of 24 Vac heating 
and cooling systems.

See Table 1 for a description.

If this control is replacing a control that contains 
mercury in a sealed tube, do not place your old 
control in the trash. Dispose of properly.

Contact your local waste management authority 
for instructions regarding recycling and the 
proper disposal of an old control.

1. Read these instructions carefully. Failure to follow 

them could damage the product or cause a 
hazardous condition.

2. Check ratings given in instructions and on the 

product to ensure the product is suitable for your 
application.

3. Installer must be a trained, experienced service 

technician.

4. After installation is complete, check out product 

operation as provided in these instructions.

Powering Methods

• Battery only
• 24 Vac only
• 24 Vac with battery backup

System Types

• Conventional (1 Heat, 1 Cool stages)
• Heat Pump (up to 2 Heat,1 Cool stages)
• 2 Pipe Fan Coil
• 2 Pipe Fan Coil with Auxiliary Heat
• 4 Pipe Fan Coil
• PTAC (up to 2 Heat, 1 Cool)

Changeover

Manual or automatic changeover selectable

System Setting

Heat-Off-Cool-Auto

Fan Setting

Auto, On

Fan Speeds

Low, Medium, High

Remote Setback

Remote Setback Input for occupancy sensor or DDC setback

Fan Ramping 
Algorithm

VersaSpeed™ Fan Ramping Algorithm for automatic fan speed selection (fan coil and PTAC 
applications)