Philips AZ5160 User Manual

19

AZ 5160/98  

page

19

1. Set the source selector to TUNER.
2. Adjust BAND to FM or MW.
3. Tune to the desired radio station using the TUNING knob.
4. Press

9 / to open the cassette holder.

5. Insert a blank tape.
6. Press 

0 to start recording.

7. For brief interruptions, press 

;. To resume recording, 

press 

; again.

8. To stop recording, press

9 /.

1. Set the source selector to CD.
2. Insert a CD and if desired, programme track numbers.
3. Press

9 / to open the cassette holder. 

4. Insert a blank cassette.
5. Press

0 to start recording.

™ Playing of the CD programme starts automatically from the

beginning of the programme.

6. For brief interruptions, press 

;. To resume recording, 

press 

; again.

7. To stop recording press

9 /

To select and record a particular passage within a track
1. Press and hold 

∞ or § on the set to select a passage.

2. Put the CD player in

; position at the selected passage.

™ Recording will start from this exact point when you press

0.

3. Press 

2; to start recording.

To ensure a good recording and playback of the tape deck, clean  
parts A,B and C show in the diagram below, after approx. 50 hours of
operation, or on average once a month. Use a cotton bud slightly
moistened with alcohol or a special head cleaning fluid to clean the deck.
• Open the cassette holder by pressing

9 /.

• Press

1 and clean the rubber pressure rollers C. 

• Press 

; and clean the magnetic heads A and also the capstans B.

• After cleaning, press 

9 /.

Cleaning of the heads can also be done by playing a cleaning cassette through once.

Å

90

33

22

2

Å

90

33

22

2