Hearth & Home Technologies CB1200I-B User Manual

R

Septemer 1, 2008

7014-083E

Page  17

Part 811-0680, Rear Shroud Kit.  

Part 811-0690, Rear Vent Kit

Includes: Rear Vent Adapter and fastener package.

Tools Required:
Electric drill, 1/8 inch drill bit, Phillips screw driver, 3/8 inch 
wrench & 7/16 inch wrench, (7/16 inch socket wrench & high 
temperature silicone adhesive are also required for rear vent 
installations).

Parts Required:  

Part 811-0680, Rear Shroud Kit. 
Includes: Six galvanized steel shroud pieces, two cover 
plates and fastener package.

Part 811-0650, Rear Shroud Top Vent 
Includes: Vent pipe and two 1/4 - 20 x 3/4 inch bolts with 
nuts.

Part 811-0660, 3 inch Top Vent Adapter  

  Part 811-0670, 

4 inch Top Vent Adapter

Vertical Exhaust 
Transition Pipe

Top Vent Adapter

1.  Remove the top vent adapter from the vertical exhaust 

transition pipe.  Figures 17.2 and 17.5.

2.  Use 2 screws to attach left corner filler piece of rear 

shroud to the insert hopper.  Figures 17.1 and 17.2.

3.  Use (2) 1/4 - 20 x 3/4 inch bolts with nuts to install rear 

shroud top vent to the exhaust transition. See boxed 
area in Figure 17.3.  (Circled area, top vent adapter, 
will be installed later).

4.  Install the left shroud panel corner at 3 points, 2 screws 

into back of hopper and 1 down into the filler piece).
Figure 17.4

(Note:  All photos depict top vent 

installation).