Hearth & Home Technologies SANTAFEI-B User Manual

R

September 1, 2008

7019-205C

Page  21

Access Panels

Open Hopper Lid for
Easier Placement of
Panel Set

Magnet

Hook

View of "L" Bracket

installed

1.  Lay panel top and legs face down on protective cov-

ering to prevent scratching.

1.  Attach the panel legs to the top panel using a Phillips 

head screwdriver.  There are 2 screws for each leg.  
Figure 21.2.

2.  Open the hopper lid by pulling toward you.  This will 

make it easier to set the panels in place.  Secure the 
panels to the insert, 2 screws per leg, as shown in 
Figure 21.3.

3.  Connect the trim pieces together using the “L” Brack-

ets supplied.  Figure 21.4.

4.  Slide the trim over the top of the panels.

5.  Install the access panels.  At the bottom of the access 

panel there are 2 hooks that slip into a slot at the 
bottom of the side panel and a magnet at the top that 
holds the access panel in place.  Figure 21.3.

Attach panel
legs to top

Back view of panel

Access Panel

Side
Panel