Samson SUB88 User Manual

Operating the Resolv sub88

The Ins and The Outs

The sub88 features both balanced and unbal-

anced line level inputs and outputs so that con-

nection with passive or active satellites is easy.

It is recommended that you use the balanced

line inputs and outputs to interface the sub88

with active monitors like the Resolve 50a’s. See

page 16 for a detailed cable wiring diagram.

UNBALANCED INPUTS

Unbalanced connections can be made using
the female RCA connectors.

Note: In order to get the lowest amount of
induced noise and hum, use the Balanced con-
nectors whenever possible.

BALANCED INPUTS

If you want to connect your mixer using bal-
anced line level signals, use the female XLR
connectors.

UNBALANCED OUTPUTS

These female RCA connectors send unbalanced
line level signals to powered satellite speakers
or an amplifier connected to passive satellites.

BALANCED OUTPUTS

Male XLR connectors that send the balanced line
level signals to powered satellite speakers or an
amplifier connected to passive satellites.

SUB BYPASS JACK

The Sub Bypass jack provides a switch closure to

activate sub88’s internal mute circuit. By using

a standard footswitch that you can buy at your

local music store or by making a cable with a

switch, or even by wiring a switch permanently

in the mix area, the sub88 can be easily turned

on and off.

AC INLET

Connect the supplied IEC power cable here. Be

sure that the power switch is in the off position

when connecting the AC cord.

ENGLISH