Bang & Olufsen 1 User Manual
You can make BeoSound 1 wake you up
in the morning.
in the morning.
The Wake-up Timer is a once-only
Timer. Like an alarm clock it is deleted
once it has been executed.
Timer. Like an alarm clock it is deleted
once it has been executed.
While the Timer is executed, the time is
shown in the display, when you operate
or switch off your BeoSound 1, the
display returns to the mode you have
chosen.
shown in the display, when you operate
or switch off your BeoSound 1, the
display returns to the mode you have
chosen.
Once you have made one Wake-up Timer,
BeoSound 1 automatically suggests the
time you entered for the latest Wake-up
Timer in the display when you enter a
new one.
BeoSound 1 automatically suggests the
time you entered for the latest Wake-up
Timer in the display when you enter a
new one.
Wake-up Timers can of course also be
deleted again.
deleted again.
Enter a Wake-up Timer
When you choose radio as your source, the
radio will start playing on the station you last
listened to. If you choose CD as your source,
make sure that a CD is loaded. If you do not
choose a source, the radio will be used for
your Wake-up Timer.
radio will start playing on the station you last
listened to. If you choose CD as your source,
make sure that a CD is loaded. If you do not
choose a source, the radio will be used for
your Wake-up Timer.
While BeoSound 1 is in standby,
press and hold or until the
time for the latest Wake-up
Timer is shown in the display,
the digits are blinking
press and hold or until the
time for the latest Wake-up
Timer is shown in the display,
the digits are blinking
Press or to find the time
you want the BeoSound 1 to
start playing. Holding down
or will accelerate the change
in numbers
you want the BeoSound 1 to
start playing. Holding down
or will accelerate the change
in numbers
Press the button of the source
you want to use for your Wake-
up Timer; RADIO or CD. Pr or
Cd is shown in the display
you want to use for your Wake-
up Timer; RADIO or CD. Pr or
Cd is shown in the display
Press STORE to store the time
you want. The time for the
Wake-up Timer is briefly shown
in the display
you want. The time for the
Wake-up Timer is briefly shown
in the display
NOTE! If the clock has not been set, or BeoSound 1
has been disconnected from the mains for
approx. 30 minutes, it is not possible to set a
Wake-up Timer. The clock must be set first, refer
to the previous page.
has been disconnected from the mains for
approx. 30 minutes, it is not possible to set a
Wake-up Timer. The clock must be set first, refer
to the previous page.
Wake-up Timer
Using Beo4
You can also use the Beo4 remote control to
enter a Wake-up Timer.
enter a Wake-up Timer.
While BeoSound 1 is in standby,
press the MENU button on
Beo4. The time for the latest
Wake-up Timer is shown in the
display, the digits are blinking
press the MENU button on
Beo4. The time for the latest
Wake-up Timer is shown in the
display, the digits are blinking
Key in the time you want
BeoSound 1 to start playing
BeoSound 1 to start playing
Press the button of the source
you want to use for your
Wake-up Timer, RADIO or CD.
Pr or Cd is shown in the display
you want to use for your
Wake-up Timer, RADIO or CD.
Pr or Cd is shown in the display
Press GO to store your
Wake-up Timer. The Wake-up
time is shown briefly in the display
Wake-up Timer. The Wake-up
time is shown briefly in the display
12
6.25
7.10
RADIO
Pr
STORE
7.10
MENU
6.25
1 – 9
7.10
RADIO
Pr
GO
7.10