Jensen BT1613 User Manual

BT1613

6

Press the BAND button (5) during radio play to 
switch between three FM bands and two AM 
bands. “F1”, “F2”, “F3” or “AM”, “AM2” will 
appear in the display to indicate the band 
currently selected.

Press the >>| button (14) to tune upward in 
frequency and the |<< button (13) to tune 
downward in frequency. The unit will 
automatically stop at the next strong station. If 

the Local mode is active, the radio will seek the 
next strong local station when either button is 
pressed.

Press the >>| (14) or |<< (13) button for more 
than two seconds to select manual tuning 
mode. “MANUAL” will appear in the display. 
Press the Up or Down Tuning buttons to move 
radio frequency up or down two digits at a time. 
Press and hold the Up or Down Tuning buttons 
to quickly advance to a certain frequency. 
Release when the desired frequency is 
reached. If tuning is not adjusted within five 

seconds of entering manual tuning mode, the 
radio will revert to automatic tuning and “AUTO” 
will appear in the display.

Up to six stations on each band can be stored 
as presets and can then be instantly recalled by 
pressing the associated preset button on the 
front panel (19-24) or remote control. To store a 
station, turn the radio on and select the desired 
band and station. Press and hold the desired 
preset button (numbered one through six on the 
face of the radio or remote control) for more