Hisense Group H7 User Manual

9

10

•  We recommend that at least 2 people are available to lift and transport the TV. 

•  Before moving or lifting the TV, disconnect the power cord and all cables.

•  When holding the TV, face the screen away from you to avoid damage.

•  Hold the top and bottom of the TV firmly.

Your TV can be mounted on a wall using a wall mount bracket (not supplied) that can be purchased separately. 

Before you begin the installation instructions provided by the wall mount manufacturer, we suggest that you do the 

following things:

1.  Remove the TV stand if you already attached it.

2.  Place the TV face down on a clean, safe and cushioned surface.

3.  Place the spacers (not included) in the corresponding bracket holes.

•  Be sure to use the provider spacers between the TV and the bracket when attaching the mount.

•  To prevent internal damage to the TV and ensure it is mounted securely, be sure to use fixing screws (not 

provided) that are 9.5 - 11.5 mm in length when measured from the attaching surface of the mounting hook.

Follow instructions provided with the Wall-Mount bracket. 

•  If you are not sure of your ability to complete the installation, contact a professional installer or service 

technician for assistance. Hisense is not responsible for any damages or injuries that occur due to mishandling 

or incorrect assembly. 

•  The selected screws are 9.5 - 11.5 mm in length when measured from the attaching surface of the TV’s rear 

cover. The diameter and length of the screws differ depending on the Wall-Mount Bracket model.

Follow the steps and illustrations below to attach the stand.

 

Figure 4. Stand Installation steps

Figure 5. Ports and buttons on Your TV

a. Secure the 

STAND COVER to the STAND 

COLUMN with 4 screws.

b. Insert 2 (ST4) screws in the front and 2 

(M5) screws in the back.

 

a. Align the 

BASE STAND with the screw 

    holes located on the bottom of the TV.

b. Secure the 

BASE STAND to the TV with 

    the four screws tightly.

BASE STAND

TV BACK

M5×12mm

SCREWS

Carefully place your TV on a soft, cushioned, 

surface to prevent damage to the screen.

M5 x 12mm

   

Secure the 

STAND COLUMN to the BASE 

with four screws.

BASE

STAND COLUMN

SCREWS

STAND COVER

STAND COLUMN

SCREWS

STAND COVER

STAND COLUMN

M5×12mm

Power input

HDMI2

HDMI3

HDMI4

IR BLASTER

LAN

PC/DVI

AUDIO IN

PC IN

MUTE

INPUT

CH

CH 

VIDEO

AV IN

L

R

HDMI1

ANT/CABLE IN

DC 5V   0.5A(MAX)

USB

USB

DC 5V   0.5A(MAX)

USB

Y

P

B

P

R

COMPONEN

T IN