Siemens CCIC1410 User Manual

90 

Siemens Building Technologies

 

 

Fire Safety & Security Products 

 

05.2009

 
 

 

This feature allows you to upgrade the firmware on your network camera. It takes 
about five minutes to complete the process. 

 

 

 

 

 

Do not power off the network camera during the upgrade process and ensure 
that the PC running the upgrade software (Installation Wizard / Web Browser) is 
running stable. Otherwise the camera will be rendered defective (out-of-
warranty).  

 

 

 

There are two ways to upgrade the firmware: 

z

 

Using the CCIC1410 Homepage 

z

 

Using the CCIC1410 Installation Wizard 

 

Download a new firmware file from SIEMENS website: 

. The file is in pkg file format. 

Open the CCIC1410 Homepage (see chapter 9.1). 

Choose the Configuration menu. 

On the left hand side, choose the menu item Maintenance. 

In the Upgrade firmware section, click Browse and select the correct 
firmware file. 

Click Upgrade. 

Î

 

The network camera starts to upgrade and will reboot automatically when 
the upgrade is complete. 

Î

 

The message “Reboot system now!! This connection will close” 
indicates that the upgrade was successful. 

Re-access the network camera. 

 

 

 

 

 

 

NOTE 
The CCIC1410 Installation Wizard allows you to upgrade several devices (of the same model) at the 
same time. If you select different models, then the Firmware Upgrade button will be disabled. 

 

 

 

Select one device or several devices in the device list on which you want to 
upgrade the firmware (see chapter 8.3.1: Select a device for the 
configuration). 

Click the Firmware Upgrade button on the left side.  

 

Î

 

The following window appears: