Lucent Technologies 8.2 User Manual
DEFINITY ECS Release 8.2
Administrator’s Guide
Administrator’s Guide
555-233-506
Issue 1
April 2000
Features and technical reference
1330
Extended User Administration of Redirected Calls
20
■
Call Coverage
Extended User Administration of Redirected Calls interacts with this
feature only in that system users can change their lead-coverage path.
feature only in that system users can change their lead-coverage path.
An attempt to activate Send All Calls is denied if the currently active
coverage path does not allow Send All Calls in its coverage criteria.
However, if you activate Send All Calls when it is allowed, and then change
your coverage path to one that does not allow Send All Calls, the Send All
Calls button remains lit and Send All Calls automatically resumes if you
change back to the coverage path that allows it.
coverage path does not allow Send All Calls in its coverage criteria.
However, if you activate Send All Calls when it is allowed, and then change
your coverage path to one that does not allow Send All Calls, the Send All
Calls button remains lit and Send All Calls automatically resumes if you
change back to the coverage path that allows it.
■
Call Forwarding
When Call Forwarding is active, the status lamps for the active features for
that extension are lit. When Call Forwarding is deactivated, the status
lamps for both Call Forward All and Call Forward Busy/DA buttons for
that extension are extinguished. Off-net forward destinations are not
allowed.
that extension are lit. When Call Forwarding is deactivated, the status
lamps for both Call Forward All and Call Forward Busy/DA buttons for
that extension are extinguished. Off-net forward destinations are not
allowed.
■
Distributed Communications System
Assign a different telecommuting access extension for each switch. You
can use Extended User Administration of Redirected Calls from any of the
DCS nodes, but you must dial the extension of the node on which your
station is defined before dialing the FAC.
can use Extended User Administration of Redirected Calls from any of the
DCS nodes, but you must dial the extension of the node on which your
station is defined before dialing the FAC.
■
Security Violation Notification
Extended User Administration of Redirected Calls security violations are
tracked and reported by SVN for station security codes, if it is enabled.
tracked and reported by SVN for station security codes, if it is enabled.
■
Tenant Partitioning
The telecommuting access extension is always automatically assigned to
Tenant Partition 1, so it can be accessed by all tenants.
Tenant Partition 1, so it can be accessed by all tenants.
The tenant number of the extension administered must be accessible by the
tenant number from which the Extended User Administration of Redirected
Calls FAC is dialed or the request is denied. If the FAC is being dialed on
site, the tenant number of the station or attendant must have access to the
tenant number of the extension administered. If the FAC is dialed off site,
the tenant number of the incoming trunk must have access to the tenant
number of the extension administered.
tenant number from which the Extended User Administration of Redirected
Calls FAC is dialed or the request is denied. If the FAC is being dialed on
site, the tenant number of the station or attendant must have access to the
tenant number of the extension administered. If the FAC is dialed off site,
the tenant number of the incoming trunk must have access to the tenant
number of the extension administered.
Related topics
Refer to
‘‘Setting up telecommuting’’ on page 285
for information about
configuring telecommuting.