Lucent Technologies 8.2 User Manual

Issue 1

April 2000

Handling incoming calls 

148

Adding call pickup 

To set up a phone so that the user can pick up calls with Directed Call Pickup, you 
need to determine if directed call pickup is enabled on your system and make sure 
that the user’s phone has a COR that allows directed call pickup.

To determine if Directed Call Pickup is enabled on your system:

1. Type 

 and press 

RETURN

.

The 

Feature-Related System Parameters

 screen appears.

2. Move to the Directed Call Pickup? field and enter 

.

3. Press 

ENTER

 to save the changes.

Now let’s modify extension 4444 to allow directed call pickup. For this example, 
assume that the Can Use Directed Call Pickup field for COR 5 is set to Y.

1. Type 

 and press 

RETURN

.

The 

Station

 screen appears.

2. In the COR field, enter 

.

3. Press 

ENTER

 to save your changes.

Let’s add a pickup group to an existing extended group where all members of the 
extended group pick up each other’s calls. We will add pickup group 6 to the 
existing extended group 56.

To create a simple extended pickup group:

1. Type 

and press 

RETURN

.

The 

Feature-Related System Parameters

 screen appears.

2. In the Extended Group Call Pickup field, type 

.

Permits feature access codes to be administered.

3. Press 

ENTER

 to save your changes.

4. Type 

 and press 

RETURN

.

The 

Feature Access Code

 screen appears.

5. In the Extended Group Call Pickup Access Code field, type the desired 

FAC.

Refer to the dial plan to enter the correct sequence and number of digits.

6. Press 

ENTER

 to save your changes.