Lucent Technologies 8.2 User Manual

Page of 1707
DEFINITY ECS Release 8.2
Administrator’s Guide  
555-233-506  
Issue 1
April 2000
Managing multimedia calling 
263
Enhanced Mode MM complex 
9
ISDN Trunk Groups. 
Lucent Technologies highly recommends that you use 
ISDN trunks for multimedia calls. ISDN PRI trunks allow complete 1-number 
access for an Enhanced multimedia complex. ANI provided over PRI trunks 
allows correct routing of multiple bearer channels to the correct destination 
device. ISDN also provides the bearer capability on a call by call basis which can 
be used to distinguish voice calls from multimedia calls.
Malicious Call Trace. 
If a malicious call terminates at a Basic multimedia 
complex endpoint, the user can dial the feature access code from the telephone to 
activate malicious call trace, followed by the extension of the multimedia 
endpoint. If the user does not dial the multimedia extension, MCT traces any call 
held on the telephone.
Message Waiting. 
Message Waiting indication is handled at the telephone. 
Because H.320 calls are converted to voice before going to coverage, all messages 
are voice only.
Night Service. 
Incoming Basic mode data calls follow established night-service 
processing for data calls. 
Remote Access. 
The switch does not prevent Basic multimedia complexes from 
attempting to use remote access. However, these Basic mode endpoints will most 
likely not be able to dial the necessary codes. 
Station Hunting . 
Basic mode data calls to endpoints that have an extension 
administered in the hunt-to-station field hunt based on established hunting criteria. 
The call is converted to voice before station hunting. 
Tenant Partitioning. 
Permission to make multimedia calls or add parties of any 
type to a conference is subject to standard tenant-partitioning restrictions. 
Terminating Extension Groups. 
Basic mode data calls to a TEG are converted to 
voice and can terminate only at a voice endpoint. Effectively, DEFINITY ECS 
treats the multimedia-complex extension as a voice-only endpoint.
Telephone Display. 
Display information for calls to or from a Basic multimedia 
complex contains the 1-number.
Enhanced Mode MM complex
The Enhanced multimedia complex provides a much greater unified and 
integrated interface for control of voice and multimedia calls. The multifunction 
voice station is used to control all calls, whether voice or multimedia. The H.320 
desktop video system is used to present the video stream, data stream and 
(optionally) audio stream to the user. The H.320 desktop video system is 
not 
used 
for call control. The Enhanced multimedia complex allows the multifunction